|Grade||Genuine Rolex||AAAAA Clone||AAA Replica||A Replica|
|Movement||Rolex Calibre 3235||Genuine Swiss Clone 3235 movement||Swiss 2836 Movement||Asian 2813 Movement|
|Time Accuracy||-3/+5 sec per day COSC certified||-5/+6 sec per day COSC certified||-10/+10 sec per day COSC certified||-1/+2 min per day COSC certified|
|Stainless Steel Type||904L Stainless Steel||904L Stainless Steel||316L Stainless Steel||316L Stainless Steel|
|Crystal||Sapphire crystal||Sapphire crystal correct date magnification||Sapphire crystal||Mineral Glass|
|Logo & Markings||laser etchings||Exact on entire watch||90% Exact on entire watch||70% Exact on entire watch|
|Dial||Genuine Rolex||Exact detail and font||90% exact detail and font||70% Exact detail and font|
|Luminous Markers||Rolex Lumen||SuperLuminova Swiss Lumen||Swiss Lumen||Normal Lumen|
|Waterproof||100m on standard models||Tested up to 300m||Tested up to 30m||Life waterproof|
|Life expectancy||Lifetime||Lifetime||3-5 years||1-2 years|
|Warranty||2 Years||Up to 5 Years||Up to 3 Years||Up to 1 Years|
|Dial Color||Green Dial|
|Engine||Rolex Calibre 2836/2813|
Band Material: 316L. This band uses the best 316L stainless steel, which is a highly durable and corrosion-resistant material.
Watch Case: 316L. The case is made of 316L, which is one of the most heat-resistant stainless steel grades. Its corrosion resistance is very good, even at temperatures as high as 1100*F, without any further heat treatment.
Case Back: Solid. The hard solid bottom cover can transmit vibration better than the bottom cover of the plastic case.
Crystal: Sapphire Crystal. For watches, crystal is a very important part and a unique optical material. It is not only dazzling, but also scratch-resistant. The color rendering index (CRI) of the anti-reflective coating is 100, and the brightness is increased by up to 50%. Tips: The A Replica is applied with mineral glass instead of sapphire.
Hand: Silver-tone. The watch’s hands is silver-tone. It blends perfectly with the dial.
Second Markers: Minute Markers around the outer rim. The minute mark on the outer edge of the glass is a design element that represents time. As shown in the figure above, the minute mark around the outer edge.
Dial Markers: Index. We can use watches with indexes. Unlike ordinary dials, watches use some simple indexes as dial markers to tell us what time it is now.
Luminiscence: Hands and Markers. The design of the watch’s luminiscence is hands and markers. It makes your watch look more high-end.
Bezel Material: Stainless Steel. The bezel, made of stainless steel bezel, made of stainless steel bezel material. It needs to be durable and can resist abrasion. The design of stainless steel bezel material makes it suitable for the watch bezel because of its ability to withstand a lot of pressure and friction.
Clasp: Fold Over Clasp. A fold over clasp are used in the watch the combination of a watch case and a wristwatch can be a very appealing option for many consumers. Of course, one must keep in mind that the product should be durable and last a long time. This watch bracelet is made to meet all these needs. It is produced using high quality materials, designed with the concept of visual effect, and perfectly matches today’s fashion trends.
Water Resistance: 30 meters. The watch we use a waterproof at 30 meters. But please make sure you close the crown properly. Tips: The A Replica is just daily waterproof, need to purchase additional waterproof service which is up to 30 meters.
Function: Date, Hour, Minute, Second. The watch has many functions. The watch is equipped with a indicate date to measure time, the minute dial can estimate the current time, and the second dial can estimate the time after the interval.